Activating Theftlock

1. Write down any number from 000 to 1999 and keep it in a safe place.
2. Turn the ignition to the "ACC" or the "RUN" position.
3. Turn the radio "OFF."
4. Press the 1 and 4 push-buttons together. Hold them down until "-" shows on the display.

You are now ready to enter your code. Do not wait more than 15 seconds between each step.

5. Press "MIN." "000" will appear on the display.
6. Press the "MIN" push-button again to make the last two digits agree with your code.
7. Press the "HR" push-button to make the first one or two digits agree with your code.
8. Press the AM/FM push-button after you have confirmed that the code matches the one you wrote down. "REP" appears in the display, indicating that you need to repeat steps 5-7.
9. Press AM/FM. This time the display will show "SEC." "SEC" means your radio is secure.

NOTE: With the ignition off, the THEFT LOCK indicator will flash.