Keyless Entry: Service and Repair

1. Ground pin 8 of the Data Link Connector (DLC).
^ Receiver will respond by locking and unlocking all doors within 2 seconds.

2. Press any button of the first transmitter to be programmed.

3. he control module will respond by locking/unlocking all doors and activating the lift- gate release (if equipped).

4. Press any button of the second transmitter to be programmed (if used).

5. The control module will respond by locking/unlocking all doors and activating the liftgate release (if equipped).

6. Remove the ground from pin 8 of the Data Link Connector (DLC).

7. Transmitter operation is verified by locking and unlocking the doors and automatically activating the liftgate release.