Component Tests and General Diagnostics

1. CHECK to see that the PWR ACCY Circuit Breaker is resetting. REPLACE if necessary.
2. CHECK that Ground G105 is clean and tight.
3. CHECK that there are not any obstructions under the seat or in the carriages which may affect Power Seat Operation.
^ CHECK for a broken (or partially broken) wire inside of the insulation which could cause system malfunction GOOD in a Continuity/Voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded. and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ CHECK for proper installation of any aftermarket electronic equipment which may affect the integrity of other systems (See Diagnostic Aids for General Troubleshooting Procedures). Diagnostic Aids