Rear
REAR WINDOW WIPER/WASHERWhen the Washer Switch is depressed, voltage is supplied to the Solid-State Control Board in the Rear Window Wiper/Washer Module. The Wiper Switch supplies battery voltage to the Rear Washer Pump through DK GRN (392) wire and grounded through the BLK (350) wire to G106.
REAR WINDOW WIPER
The features of the Wiper System are ON, and DELAY, the Rear Window Wiper/Washer System includes an operating mode in which the wiper makes single strokes with a time interval between strokes. The time interval is controlled by a Solid-State Rear Window Wiper/Washer Module. In the ON position, the Rear Window Wiper/Washer Switch supplies voltage to the Window Wiper/Washer Module through GRY (391) wire. The Rear Window Wiper/Washer Module provides ground from Ground G403 through the BLK (1450) wire for the Rear Window Wiper System. With the Rear Window Wiper/Washer Switch in the Delay position, battery voltage is supplied from LT BLU (97) wire and GRY (391) wire, the Wiper runs at the non-adjustable delay interval. When the Rear Window Wiper/Washer Switch is turned to the OFF position, the Wiper completes the last sweep and stops in the Park position.