Fog Lamp Bulb Replacement

CAUTION: Halogen bulbs contain a gas under pressure. Handling a bulb improperly could cause it to shatter Into flying glass fragments. To help avoid personal Injury:
- Turn off the lamp switch and allow the bulb to cool before changing it. Leave the switch off until change is complete.
- Always wear eye protection when changing a halogen bulb.
- Handle the bulb only by Its base. Avoid touching the glass.
- Do not drop or scratch the bulb. Keep moisture away.
- Place the used bulb In the new bulb's carton and dispose of It properly.

REMOVE OR DISCONNECT
- Make sure the headlamp switch and fog lamp switch are off.
1. Two screws and the lens from the front of the lamp assembly.
2. Bulb by twisting it to the left.

INSTALL OR CONNECT
1. Bulb into the lamp assembly and twist it to the right.
2. Lens and two screws.