Convenience Center Replacement

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Wiring connectors at the front of the convenience center.
- Label the wires for reassembly.
3. Convenience center from the bulkhead connector.
- Disengage the tabs at the upper left and lower right posts. The tabs clip into the bulkhead connector, and separate the bulkhead connector from the convenience center.
4. Wiring connectors from the rear of the convenience center.
- Label the connectors for reassembly.
5. Convenience center from the vehicle.

INSTALL OR CONNECT
1. Convenience center to the vehicle.
2. Wiring connectors to the rear of the convenience center in their original locations.
3. Convenience center to the bulkhead connector.
- Engage the post tabs of the convenience center to the bulkhead connector.
4. Wiring connectors to the front of the convenience center in their original locations.
5. Negative battery cable.