Engine Installation

1. Install the engine in the vehicle.
2. Install the engine mount through bolts and the nuts.
3. Install the bell housing bolts.
4. Remove the lifting fixture, the engine lift bracket and the transmission jack.
5. Raise and suitably support the vehicle.
6. With an automatic transmission engine, Install the bolts from the flywheel to the torque converter. Refer to Automatic Transmission.
7. Install the flywheel or the torque converter cover.
8. Install the starter motor.
9. Install the exhaust pipes at the exhaust manifolds.
10. Install the front axle.
11. Lower the vehicle.
12. Install the air conditioning compressor.
13. Install the vacuum hoses.
14. Install the fuel supply line.
15. Install the accelerator and the cruise control linkages.
16. Connect the engine wiring harness and the connectors.
17. Install the radiator and A/C condenser as an assembly.
18. Install the air cleaner box and the intake duct.
19. Install the hood.
20. Install the negative battery cable.
21. Install the proper quantity and grade of coolant. Refer to Cooling System.
22. Charge the A/C system. Refer to Heating and Air Conditioning.
23. Install the proper quantity and grade of engine oil.