Installation For Leather Seats

NOTE:
The opening in the leather seat trim is large enough to accommodate insertion of the protector cover without unfastening the seat trim.

1. Slide the protector cover (Figure 4, Item 1) under the leather seat trim and on top of the recliner mechanism.

2. With your hand, push back the trim on the seat-back to expose the recliner pin (Figure 4, Item 2). Mount the protector cover slotted tab onto the outboard recliner pin (Figure 4, Item 2). When the slotted tab is aligned with the outboard recliner pin, push down on the protector cover, snapping the net hole tab onto the inboard recliner pin. The body of the cover must completely saddle the top surface of the recliner mechanism.

3. Repeat same procedure on outboard side of front passenger seat.

4. Install the GM Campaign Identification Label.