Refrigerant Oil Distribution

Front System Only PAG Oil 240 ml (8 fl. oz)

Front & Rear System PAG Oil 330 ml (11 fl. oz)

During component replacement, new oil quantities should be added to the system as follows:

^ Compressor replaced.
- If less than 30 ml (1 fluid ounce) is drained, add 60 ml (2 fluid ounces).
- If more than 30 ml (1 fluid ounce) is drained, add same amount.
^ Receiver and dehydrator replaced.
- Add 30 ml (1 fluid ounce) more than what was drained from old receiver and dehydrator.
^ Evaporator replaced.
- Add 90 ml (3 fluid ounces) oil.
^ Condenser replaced.
- Add 30 ml (1 fluid ounce) oil.