Headlamp Aiming Alternative Procedure

Description:

TOOLS REQUIRED:
J 25300 Headlamp Aimer

ADJUST
1. Make sure all the components are in place if other work has been done on the vehicle.
2. Make sure the vehicle is on a level surface.
3. Stop all other work on the vehicle.
4. Make sure the vehicle has a half tank of fuel or less.
5. Close all of the doors.
6. Rock the vehicle sideways.
7. Using Headlamp Aimer J 25300, adjust the headlamps to the specifications required by state and local authorities. Instructions for tool use accompany the tool. This kit contains special adapters for use with composite headlamps.