Finding A Station

AM-FM: Press the lower knob to get AM or FM.
TUNE: Turn this knob to tune in radio stations.
SEEK: Press the right arrow to tune to the next higher station and the left arrow to tune to the next lower station and stay there.
SCAN: Press both SEEK buttons to listen to a few seconds of each radio station. SCAN will light up on the display. Press the right arrow to tune in the next higher station and press the left arrow to tune to the next lower station. Press the VOLUME-BAL, or both SEEK buttons to stop scanning.
PUSH BUTTONS: The four numbered pushbuttons can be set for up to 14 stations (seven AM and seven FM).
1. Tune to the desired station.
2. Press SET.
3. Press and hold one of the four pushbuttons, within 5 seconds. When that numbered button is pressed, the set station will return.

In addition to the four stations set as above, up to three additional stations may be preset on each band by pressing two adjacent buttons at the same time.
1. Tune to the desired station.
2. Press SET.
3. Press and hold two adjacent buttons at the same time, within 5 seconds. When the same two buttons are pressed, the set station will return.
4. Repeat these steps for each pair of buttons .