Generator Brace

Stator Installed In The Slip Ring End Frame:

Installing The Slip Ring End Bearing:

REMOVE OR DISCONNECT
1. The generator from the engine.
2. The generator bracket from the engine.
3. The generator brace retaining bolts from the generator bracket.
4. The generator brace.

INSTALL OR CONNECT
1. The generator brace.
2. The generator brace retaining bolts from the generator bracket.
Tighten
^ The generator brace to the generator bracket bolts to 50 N.m (37 lb ft).
3. The generator bracket from the engine.
4. The generator to the engine.