Power Steering Line/Hose: Service and Repair

Power Steering Inlet Hose:

Outlet Hose:

Steering Gear Outlet Hose To Pump:

Steering Gear Inlet Hose:

Steering Gear Outlet Hose:

When a hose is either reinstalled or replaced, the following points are essential:
- Route the hoses in the same position as they were in before removal.
- Route the hoses smoothly and avoid sharp bends and kinking.
- Tighten the pump end hose fitting, gear line fitting, and booster line fitting to specifications. Refer to "Fastener Tightening Specifications."
- After hoses are installed, check for leaks while the system is being bled. Refer to "Bleeding the Power Steering System."

NOTICE: Do not start the engine with any power steering hoses disconnected, or damage to the components could occur.