Roof and Associated Components: Service and Repair

Luggage Carrier:

Luggage Carrier:

Luggage Carrier Components:

REMOVE OR DISCONNECT
1. Rubber side rail cap from the center rail support.
2. Screws from the center supports.
3. Screws from the end supports.
4. Luggage carrier from the roof.
5. Center rail supports.
6. Side and center rail support gaskets.

DISASSEMBLE
1. Remove screws from the side rail supports.
2. Side rail supports from the side rails.
3. Remove screws from the cross rails.
4. Cross rails from the sliders.
5. Screws from the sliders and the lock plates.
6. Sliders from the slots in the side rails.

ASSEMBLE
1. Sliders into the slots in the side rails.
2. Screws into the sliders and the lock plates
Tighten
^ Slider to the side rail screws to 3 N.m (27 lb in).
3. Cross rails onto the sliders.
4. Screws to cross rails.
Tighten
^ Cross rail screws to 2 N.m (18 lb in).
5. Side rail supports to the side rails.
6. Screws to the side rail supports.
Tighten
^ Side rail support screws to 2 N.m (18 lb in).

INSTALL OR CONNECT
1. Side and center rail support gaskets.
2. Center rail supports.
3. Luggage carrier onto the roof.
4. End support to the vehicle screws.
Tighten
^ End support screws to 3 N.m (27 lb in).
5. Screws into the center supports.
Tighten
^ Center support screws to 3 N.m (27 lb in).
6. Rubber side rail cap to the center rail support.