Instrument Cluster / Carrier: Service and Repair

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Instrument cluster bezel. The bezel is retained by four clips across the top edge and four clips across the bottom edge.
^ On vehicles equipped with tilt wheel, move to the lowest position. On vehicles without tilt wheel it may be necessary to drop the column.
3. Electrical connections for headlamp switch, dimmer control and accessory switches.
4. Four screws retaining instrument cluster.
5. Instrument cluster from vehicle.
^ Keep fingers and other foreign objects away from the flexible circuit connections.
6. Bulb and base assembly by turning 1/2 turn to the left.

INSTALL OR CONNECT
1. Bulbs to the cluster by inserting the socket and bulb assembly into the cluster and twisting to the right.
2. Press instrument cluster into instrument panel.
3. Instrument cluster hold-down screws.
^ Electrical connections for headlamps, dimmer control and accessory switches.
4. Instrument cluster bezel.
5. Negative battery cable.