Battery Replacement

Battery Retainer:

REMOVE OR DISCONNECT
1. Negative cable from the negative battery terminal.
2. Positive cable from the positive battery terminal.
3. Battery hold-down retainer.
4. Battery.

INSPECT
- Battery for damage.
- Cables and connectors for corrosion or wear.
- Carrier for damage or foreign objects.

If damage is noted, find and correct the cause.

CLEAN
- Corrosion from cables and connectors.
- Battery tray of any foreign objects.

Battery Retainer:

INSTALL OR CONNECT
1. Battery into carrier.
2. Hold-down retainer.
Tighten
- Retainer bolt to 15 N.m (11 lb ft).
3. Positive cable and positive battery terminal to the battery.
4. Negative cable and negative battery terminal to the battery.
Tighten
- Side terminals to 15 N.m (11 lb ft).