Cargo Lamp: Service and Repair

REMOVE OR DISCONNECT
- Make sure the headlamp switch is off.
1. Lens screws and lens.
2. Bulb.
3. Lamp assembly screws.
4. Lamp assembly from the roof.
5. Wiring harness from the lamp assembly.
6. Gasket from the roof.

INSTALL OR CONNECT
1. Gasket to the roof.
2. Wiring harness to the lamp assembly.
3. Lamp assembly to the roof.
4. Lamp assembly screws
5. Bulb.
6. Lens and screws.

Tighten

- Cargo/Stoplamp retaining screws to 2 Nm (17 lb in).