Door Locks

When the LOCK button is pressed on the Transmitter and the Remote Control Door Lock Receiver receives a signal with a valid Vehicle Access Code (VAC), the lock function sequence is performed. The Remote Control Door Lock Receiver will lock all doors.

The Remote Control Door Lock Receiver supplies battery voltage to the coil of the Lock Relay (part of the Door Lock Relay Assembly) through the CKT 195 wire. The Lock Relay is energized, and battery voltage is supplied to the Door Lock Motors. Ground for the LH Door Lock Motor is provided at the Remote Control Door Lock Receiver through internal contacts of the module. Ground for the other Door Lock motors is provided through the contacts of the UNLOCK Switch, inside the Door Lock Relay Assembly. All Door Lock Motors run to Lock all Doors.