Fourth Clutch Assembly Disassemble

- Tools Required:
- J 38882 Fourth Clutch Spring Adapter
- J 23327 Spring Compressor
- J 38731-3 Base
- Or Equivalent





1. Remove the fourth clutch backing plate retainer ring (523).





2. Remove the fourth clutch backing plate (524).
3. Remove the fourth clutch plates (525, 526).





4. Place the fourth clutch housing (529) onto J 38731-3.
5. Compress the fourth clutch spring assembly (532) using J 38B82 and J 23327.
6. Remove the fourth clutch spring retainer ring (533)
7. Remove the J 38882 and the J 23327.
8. Remove the fourth clutch spring assembly (532).





9. Remove the fourth clutch piston (528).
10. Remove the fourth clutch piston inner seal (527).
11. Remove the fourth clutch piston outer seal (531) from the fourth clutch housing (529).
12. Inspect the fourth clutch housing orifice cup plug (530). The orifice is open approximately 0.51 mm (0.020 inch).