Spring Bushing Replacement

REMOVE OR DISCONNECT
1. Spring assembly from the vehicle. Refer to "Spring Assembly Replacement."
2. Bushing from the spring assembly.
- Press the bushing from the spring in an arbor press.

CLEAN
1. The spring eye of any remaining parts of the bushing. Remove any burrs that would cause the new bushing to bind when installed.

INSTALL OR CONNECT
1. Apply rubber lubricant to the bushing, and the spring eye.
2. Bushing to the spring assembly.
- Press the bushing into the spring using an arbor press.
3. Spring assembly to the vehicle. Refer to "Spring Assembly Replacement."