Fog Lamp Assembly Replacement

The fog lamp assembly consists of the bracket, lamp housing, lens, and a halogen bulb. If the lens is broken, the assembly must be replaced. If the bulb is burned out. it can be replaced separately.

Description:

Remove or Disconnect
- Make sure the fog lamp switch is in the OFF position.
1. Bumper.
2. Electrical connectors as necessary.
3. Screws that secure the fog lamp assembly to the bumper.
4. Fog lamp assembly from the bumper.

Install or Connect
1. Fog lamp assembly to the bumper.
2. Screws that secure the fog lamp assembly to the bumper.

Tighten
- Fog lamp assembly screws to 10 N.m (88 lb in).

3. Electrical connectors as necessary.
4. Bumper.