Turn Signal Lamp: Service and Repair

Description:

Remove or Disconnect
1. Front bumper.
2. Bulb and socket from the front turn signal lamp.
A. Squeeze the socket retainer to unlock the socket.
B. Rotate the socket 1/4 turn counterclockwise to remove.
3. Screws that retain the front turn signal lamp to the bumper.
4. Front turn signal lamp from the bumper.

Install or Connect
1. Front turn signal lamp to the bumper.
2. Screws that retain the front turn signal lamp to the bumper.

Tighten
- Screws to 1.5 N.m (13 lb in).


3. Bulb and socket to the front turn signal lamp.
A. Insert the socket and rotate it 1/4 turn clockwise to install.
B. Make sure that the socket retainer locks in place.
4. Front bumper.