Instrument Panel Cluster Trim Plate Replacement

Remove or disconnect
1. Negative battery cable.
2. Set the parking brake, turn the ignition key to the "ON" position, and move the gear selector to "1st gear" position.
3. Gently pull plate away from I/P until all fasteners are released.
4. Electrical connectors, as necessary.
5. Plate from I/P.

Install or Connect
1. Plate to I/P
2. Electrical connectors, as necessary.
3. Press plate into place until all fasteners are fully seated.
4. Move gear selector into the "PARK" position, turn the ignition to the "OFF" position and release the park brake.
5. Negative battery cable.