Cylinder Head - Disassemble

DISASSEMBLY
^ Tools Required
- J 8062 Valve Spring Compressor
- J 42073 Valve Stem Oil Seal Installer
- Or Equivalents

1. Remove the spark plugs from the cylinder head.





2. Use valve spring compressor (J 8062) in order to compress the valve springs.





3. Remove the valve stem keys (1).
4. Remove the cap (2) from the valve (5 or 6).
5. Remove the valve spring (4).
6. Remove the valve stem oil seal (3).
7. Remove the valve (5 or 6).
^ Place the valves in a rack in the proper sequence so that the you can install them in the same order.