Lamp Assembly Replacement

Dome And Reading Lamp:

Remove or disconnect
1. Negative battery cable. Refer to Service Precautions.
2. Dome lamp lens.
3. Screws from lamp assembly.
^ Lower the lamp assembly.
4. Electrical connector from lamp assembly.
5. Assembly from vehicle.

Install or Connect
1. Assembly to vehicle.
2. Electrical connector to lamp assembly.
3. Screws retaining assembly to vehicle.

Tighten
^ Lamp housing screws to 2 N.m (18 Lb. in).

4. Lens to assembly.
5. Negative battery cable. Refer to Service Precautions.