Marker Lamp: Service and Repair

Remove or Disconnect
^ Make sure the headlamp switch is off. Refer to "Service Precautions.
1. Two mounting screws.
2. Combination lamp assembly from vehicle.
3. Side marker and/or turn signal sockets from combination lamp housing.
4. Side marker and/or turn signal bulbs from sockets.

Install or Connect
1. Side marker and/or turn signal bulbs into their sockets.
2. Sockets into the combination lamp housing.
3. Combination lamp assembly to vehicle.
4. Two mounting screws.

Tighten
^ Tighten mounting screws to 1.4 N.m (12 Lb. in).