Differential Carrier Bushing

^ Tool Required:
- J 33791 Bushing Remover and Installer Set

Important: The driveline components in this vehicle have been factory system-balanced. System balance provides a smoother running driveline operation. However, it is essential the positions of all driveline components relative to the propeller shaft and axles be observed and accurately reference marked prior to disassembly. These components include the propeller shafts, drive axles, pinion flange, inner axle shafts, etc. All components must be reassembled in the exact relationship to each other as they were when removed. Specifications, torque values, and any measurements prior to disassembly must be followed to maintain the factory balance.

REMOVE OR DISCONNECT






1. Differential carrier assembly.





2. Bushing using J 33791.

INSTALL OR CONNECT












1. Bushing using J 33791.

Important: Make sure spacer (J 33791-3) is correctly installed between the bushing and carrier ear to prevent the bushing from being pressed in too deeply.

2. Differential carrier assembly.