Rear Wipers

1. CHECK condition of RR WPR Fuse. If fuse is open, LOCATE and REPAIR the source of overload. REPLACE fuse.
2. CHECK that Grounds G113 and G400 are clean and tight.
3. CHECK for mechanical binding.
^ CHECK for a broken (or partially broken) Wire inside of the insulation which could cause system malfunction but prove "GOOD" in a Continuity/Voltage CHECK with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ CHECK for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.