Front Suspension

REMOVAL PROCEDURE
^ Tools Required:
- J 9746-02 Wheel Stud Remover

1. Raise the vehicle. Support the vehicle with safety stands.
2. Remove the tire and wheel assembly.

NOTICE: Support the caliper with a piece of wire to prevent damage to the brake line.

3. Remove the brake caliper.
4. Remove the hub/rotor.
5. Remove the wheel hub bolts with a press.





^ Support the hub/rotor using the J 9746-02 and the press bars.
^ Do not damage the wheel mounting surface on the hub/rotor flange.

INSTALLATION PROCEDURE





1. Install the wheel hub bolts into the hub/rotor.
1.1. Place four washers and a nut on the bolt.
1.2. Tighten until the bolt is fully seated in the hub/rotor.
2. Install the hub/rotor.
3. Install the brake caliper.
4. Install the wheel assembly.
5. Lower the vehicle.