Crankshaft, Engine

Crankshaft Journal (Main)
OD (White) (1-4) 74.9330-74.9420 mm (2.9524-2.9527 inch)
OD (White) (5) 74.9280-74.9360 mm (2.9522-2.9525 inch)
OD (Orange or Red) (1-4) 74.9250-74.9330 mm (2.9520-2.9524 inch)
OD (Orange or Red) (5) 74.9200-74.9280 mm (2.9518-2.9522 inch)
OD (Blue) (1-4) 74.9170-74.9250 mm (2.9517-2.9520 inch)
OD (Blue) (5) 74.9120-74.9200 mm (2.9515-2.9518 inch)
Taper 0.0830 mm maximum(0.0033 inch maximum)
Out-Of-Round 0.0830 mm maximum(0.0033 inch maximum)
Bearing Clearance (1-4) 0.0450-0.0830 mm (0.0018-0.0033 inch)
Bearing Clearance (5) 0.0550-0.0920 mm (0.0022-0.0037 inch)
Crankshaft Journal (Rod)
OD (Yellow) 60.9260-60.9390 mm (2.400-2.4010 inch)
OD (Green) 60.9130-60.9260 mm (2.3390-2.4000 inch)
Taper 0.0050-0.0830 mm maximum(0.0018-0.0033 inch maximum)
Out-Of-Round 0.0050-0.0830 mm maximum(0.0018-0.0033 inch maximum)
Bearing Clearance 0.0350-0.0900 mm (0.0014-0.0035 inch)
Side Clearance 0.1700-0.0305 mm (0.0020-0.0120 inch)
End Play 0.1000-0.2500 mm (0.0039-0.0010 inch)
Crankshaft Bearing (Main)-Select Fit: Refer to Crankshaft And Bearings Installation (L65) under Engine Unit Repair.
White (1) STD in Care, STD in Cap
White (2) 0.013 mm U.S. in Case, STD in Cap (0.0005 inch U.S. in Case, STD in Cap)
White (3) 0.026 mm U.S. in Case, STD in Cap (0.0010 inch U.S. in Case, STD in Cap)
Orange or Red (1) STD in Case, 0.013 mm U.S. in Cap (STD in Case, 0.0005 inch U.S. in Cap)
Orange or Red (2) 0.013 mm U.S. in Case, 0.013 mm U.S. in Cap (0.0005 inch in Case, 0.0005 inch U.S. in Cap)
Blue (1) STD in Case, 0.026 mm U.S. in Cap (STD in Case, 0.0010 inch U.S. in Cap)
Blue (2) 0.013 mm U.S. in Case, 0.026 mm U.S. in Cap (0.005 inch U.S. in Case, 0.0010 inch U.S. in Cap)
Blue (3) 0.026 mm U.S. in Case, 0.026 mm U.S. in Cap (0.0010 inch U.S. in Case, 0.0010 inch U.S. in Cap)
Crankshaft Bearing (Rod)-Select Fit: Refer to Crankshaft And Bearings Installation (L65) under Engine Unit Repair.
Yellow STD in Rod, STD in Cap (STD in Rod, STD in Cap)
Green STD in Rod, 0.026 mm U.S. in Cap (STD in Rod, 0.0010 inch U.S. in Cap)