Steering Control Module: Service and Repair

Electronic Variable Orifice (EVO)/Passlock Module:

REMOVE OR DISCONNECT
1. Negative battery cable.

CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.

2. Knee bolster.
3. IP auxiliary storage compartment.
4. Ashtray.
5. Electrical connector.
^ Pull down on module to release.

INSTALL OR CONNECT
1. Electrical connector.
^ Slide in rear tabs and push up to engage module.
2. Ashtray.
3. IP auxiliary storage compartment.
4. Knee bolster.
5. Negative battery cable.

CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.