Shift Lever Seal Replacement

REMOVAL

1. TORX(R) head screws from lower column cover. Do not remove cover, let the lower column cover pivot on upper column cover.
2. Roll seal back until TORX(R) head screw is exposed.
3. TORX(R) head screw from shift lever.
4. Shift lever.
5. Shift lever seal.

INSTALLATION

1. Shift lever seal.
2. Shift lever.
3. TORX(R) head screw to shift lever. Tighten to 22 Nm (16 lb ft).
4. Roll seal up lever until TORX(R) head screw is covered.
5. TORX(R) head screws to lower column cover. Tighten to 6 Nm (53 lb in).