Turbine Shaft Assemble

- Tools Required
- J 38736-1 Seal Installer
- J 38736-2 Seal Installer
- J 38736-3 Seal Sizer
- J 38736-4 Seal Sizer
- J 38736-5 Seal Pusher
- J 38736-6 Seal Pusher 1





1. Place the J 38736-1 onto the turbine shaft (502).
2. Set J 38736-1 to position #1.
3. Install the turbine shaft oil seal (503) using J 38736-5.
4. Remove the tools.





5. Place the J 38736-3 over the seal with the small chamfer down.

IMPORTANT: Be sure to use the small chamfer end of the sizer in order to size the lower ring. Then use the larger chamfered end of the sizer in order to size all of the other seals.

6. Leave the sizer on the seal for at least one minute in order to allow the seal to become the proper size.





7. Place the seal installer J 38736-1 onto the turbine shaft.
8. Set J 38736-1 to position #2.
9. Install the turbine shaft oil seal (503) using J 38736-5.
10. Remove the tools.





11. Place the J 38736-3 over the seal with the large chamfer down.
12. Leave the sizer on the seal for at least one minute to allow the seal to become the proper size.





13. Turn the turbine shaft (502) over.
14. Place the J 38736-2 onto the turbine shaft.
15. Set J 38736-2 to position #11.
16. Install the turbine shaft oil seal (501). Use the J 38736-6.
17. Remove the tools.





18. Place the J 38736-4 over the seal with the small chamfer down.
19. Leave the sizer on the seal for at least one minute in order to allow the seal to become the proper size.





20. Place the J 38736-2 onto the turbine shaft (502).
21. Set the J 38736-2 to position #2.
22. Install the turbine shaft oil (503) seal using J 38736-6.
23. Remove the tools.





24. Place the J 38736-4 over the seal with the large chamfer down.
25. Leave the sizer on the seal for at least one minute in order to allow the seal to become the proper size.