Delay Description

Voltage is provided to the switch through CKT 393 (WHT). When the switch is placed in the DELAY position, voltage is provided to the rear wiper motor through CKT 391 (GRY) and to the rear wiper/washer module through CKT 97 (LT BLU). Since the rear wiper/washer module is grounded through CKT 150 (BLK) to G400, the wiper motor takes a single sweep and returns to the park position until signaled by the rear wiper/washer module to make another sweep. The solid state control board, in the rear window wiper/washer module, controls the time interval. This time interval is approximately 9 seconds and is non-adjustable.