Without Scan Tool

Important: Do not clear DTCs unless directed to do so by the service information provided for each diagnostic procedure. When DTCs are cleared, the Freeze Frame data which may help diagnose an intermittent fault will also be erased from memory.

To clear Diagnostic Trouble Codes (DTCs), use the diagnostic scan tool "clear DTCs" or "clear info" function.

When clearing DTCs follow instructions supplied by the tool manufacturer.

When a scan tool is not available, DTCs can also be cleared by disconnecting one of the following sources for at least thirty (30) seconds:

Caution: To prevent system damage, the ignition key must be "OFF" when disconnecting or reconnecting battery power.

^ The power source to the control module.

^ The negative battery cable. (Disconnecting the negative battery cable may result in the loss of other on-board memory data, such as preset radio tuning).