Reverse Input Clutch Bushing Replacement

REPLACEMENT PROCEDURE

- Tools Required
- J 25019 Bushing Service Set
- J 34196 Bushing Service Set
- J 7004-1 Universal Remover
- J 8092 Driver Handle





1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
- Damaged or worn bushings
- Surface on the hub and outer housing
- Leak at the weld





2. Remove the reverse input clutch front bushing.





3. Remove the reverse input clutch rear bushing.





4. Install a reverse input clutch front bushing.





5. Install a reverse input clutch rear bushing.