Crankshaft Balancer Removal

^ Tools Required
- J 23523-F Crankshaft Balancer Remover and Installer





1. Remove the crankshaft pulley bolts.





2. Remove the crankshaft pulley.





3. Remove the crankshaft balancer bolt (3) and washer (2).

NOTICE: Refer to Fastener Notice in Service Precautions.





4. Use the J 223523-F in order to remove the crankshaft balancer.
4.1. Install the J 23523-F plate and bolts.
Tighten the J 23523-F bolts to 25 Nm (18 ft. lbs.).

4.2. Install the J 23523-F forcing screw.
4.3. Rotate the J23523-F forcing screw clockwise in order to remove the crankshaft balancer.





5. Remove the crankshaft balancer.
6. Remove the J 23523-F from the crankshaft balancer.