Valve Rocker Arm Cover Installation (Left)

1. If valve rocker arm cover gasket was removed from the valve rocker arm cover, install a NEW valve rocker arm cover gasket.
2. Install the valve rocker arm cover with gasket.





3. Install the spark plug wiring harness bracket(s) onto the valve rocker arm cover.
4. Install the valve rocker arm cover bolts.
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.





5. Remove the Positive Crankcase Ventilation Valve (PCV) and crankcase ventilation tube.