Parking System Components Removal

IMPORTANT: Do not apply excessive force, prying, or hammering to any of the parking mechanism parts. This could cause the parking system to fail.





1. Remove the manual shaft detent lever (711) and the parking pawl actuator (710) assembly.
2. Inspect the detent lever and actuator for cracks.
3. Inspect the detent lever and actuator for damage.





4. Remove the parking pawl bracket (713) and bolt (714).
5. Remove the parking pawl return spring (705).
6. Inspect the parking pawl return spring for distortion.
7. Inspect the parking pawl return spring for damage.





8. Remove the parking pawl shaft bore plug (701) from the transmission case using a screw extractor.





9. Remove the parking pawl shaft retainer (704).
10. Remove the parking pawl shaft (702).

IMPORTANT: Do not damage the parking pawl shaft case bore or a fluid leak may occur at the bore plug.

11. Remove the parking pawl (703) from the transmission case.
12. Inspect the parking pawl for cracks.
13. Inspect the parking pawl for burrs.
14. Inspect the parking pawl for damage.
15. Inspect the parking pawl shaft for damage.
16. The parking pawl shaft for proper fit.