Left

REMOVAL PROCEDURE
1. Remove the screws that retain the data link connector (DLC) to the instrument panel sound insulator. Feed the DLC lines through the hole in the sound insulator.
2. Remove the screws that retain the instrument panel sound insulator to the knee bolster and the cowl panel.
3. Disconnect the electrical connectors from the remote control door lock receiver module.
4. Remove the remote control door lock receiver module from the instrument panel sound insulator.

INSTALLATION PROCEDURE
1. Install the remote control door lock receiver module to the instrument panel sound insulator.
2. Connect the electrical connector to the remote door lock receiver module.
3. Install the screw that retains the instrument panel sound insulator to the cowl panel.

Tighten the screw to 1.9 Nm (17 lb in).

4. Install the screws that retain the instrument panel sound insulator to the knee bolster.

Tighten the screws to 1.9 Nm (17 lb in).

5. Feed the DLC through the hole in the instrument panel sound insulator.
6. Install the screws that retain the DLC to the instrument panel sound insulator.

Tighten the screws to 2.4 Nm (21 lb in).