Fog Lamp Replacement - Front

ALL EXCEPT BRAVADA AND ENVOY

REMOVAL PROCEDURE



The fog lamp assembly consists of the following components:
^ The bracket
^ The lamp housing
^ The lens
^ the halogen bulb

If the lens is broken, the assembly must be replaced. If the bulb is burned out, the bulb may be replaced separately.

1. Ensure that the fog lamp switch is in the OFF position.
2. Remove the bumper.
3. Disconnect the electrical connectors as necessary.
4. Remove the screws that secure the fog lamp assembly to the bumper.
5. Remove the fog lamp assembly from the bumper.

INSTALLATION PROCEDURE



1. Install the fog lamp assembly to the bumper.
2. Install the screws that secure the fog lamp assembly to the bumper.

Tighten
Tighten the fog lamp assembly screws to 10 N.m (88 lb in).

3. Connect the electrical connectors as necessary.
4. Install the bumper.


BRAVADA




REMOVAL PROCEDURE
1. Ensure that the fog lamp switch is in the OFF position.
2. Disconnect the electrical connector.
3. Remove the screws that retain the fog lamp assembly to the bumper.
4. Remove the fog lamp assembly from the bumper.

INSTALLATION PROCEDURE
1. Install the fog lamp assembly to the bumper.
2. Install the screws that secure the fog lamp assembly to the bumper.

Tighten
Tighten the screws to 10 N.m (88 lb in).

3. Connect the electrical connector.

ENVOY




REMOVAL PROCEDURE
1. Ensure that the foglamp switch is OFF.
2. Ensure that the ignition switch is in the LOCK position.
3. Rotate the bulb socket turn counter-clockwise in order to remove the socket from the foglamp assembly.
4. Remove the bulb from the socket.
5. Remove the push-pin style retainers that retain the foglamp to the front fascia.
6. Remove the adjustment thumbwheel from the foglamp.
7. From the front of the vehicle, remove the foglamp from the fascia.

INSTALLATION PROCEDURE
1. From the front of the vehicle, install the foglamp to the fascia.
2. Install the adjustment thumbwheel to the foglamp.
3. Install the push-pin style retainers that retain the foglamp to the front fascia.
4. Install the foglamp bulb to the socket.
5. Rotate the bulb socket turn clockwise in order to install the socket to the license plate lamp assembly.