Differential Assembly: Application and ID

All rear axles are identified by a broadcast code on the right axle tube near the carrier. The rear axle identification and manufacturer's codes must be known before attempting to adjust or to repair axle shafts or the rear axle case assembly. Rear axle ratio, differential type, manufacturer, and build date information is stamped on the right axle tube on the forward side.
^ The first three characters (1) indicate the rear axle ratio.
^ The next character (2) indicates the axle assembly build source code.
- C = Buffalo
- K = Canada
^ The next three characters (3) indicate the day built, displayed in Julian Date form.
^ The last character (4) indicates the shift.
- 1 = First
- 2 = Second
In order to verify reports made on rear axle assemblies, include full code letters and build date numbers.
Refer to Maintenance for periodic maintenance and lubrication intervals.