Fluid Pressure Sensor/Switch, A/T

Transmission Fluid Pressure Manual Valve
Position Switch To Valve Body Bolt 8.0-14.0 Nm (6-10 ft. lbs.)






Control Valve Body Bolts (in sequence) 11 Nm (97 inch lbs.)

NOTE: Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.

IMPORTANT: Certain bolts MUST be tightened in a spiral pattern as indicated by the arrows. If these bolts are tightened at random, the valve bores may become distorted. This will inhibit valve operation.



TCC solenoid bolts 11 Nm (97 inch lbs.)