Clutch Shaft Bearing Replacement

REMOVAL PROCEDURE

^ Tools Required
- J 34011 Pilot Bearing Remover





1. Remove the inner axle shaft and housing assembly.
2. Remove the clutch shaft from the carrier.
3. Remove the clutch shaft pilot bearing with J 34011.

INSTALLATION PROCEDURE

^ Tools Required
- J 33842 Pilot Bearing Installer





1. Install the clutch shaft pilot bearing using J 33842. Lubricate the bearing with axle lubricant, as specified in Fluid and Lubricant Recommendations in Maintenance and Lubrication.
2. Install the clutch shaft to the carrier.
3. Install the inner axle shaft and housing assembly.