Vacuum Actuator Replacement

REMOVAL PROCEDURE





1. Remove the battery.
2. Remove the battery tray.
3. Remove the vacuum hose from the vacuum actuator.





4. Remove the vacuum actuator cable.





5. Remove the bolts.
6. Remove the vacuum actuator.

INSTALLATION PROCEDURE





1. Install the vacuum actuator.
2. Install the bolts.
^ Tighten the bolts to 1.4 Nm (13 inch lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.





3. Install the vacuum actuator cable.





4. Install the vacuum hose.
5. Install the battery tray.
6. Install the battery.