Dome Lamp Replacement

REMOVAL PROCEDURE
On utility vehicles, two different lamps are used. One type of dome lamp is incorporated to the overhead console.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Hold the lamp assembly firmly with both hands and slide the lamp towards the left or right side of the vehicle in order to remove the dome lamp from the roof.
3. Disconnect the electrical connector.
4. Remove the dome lamp lens and trim bezel from the lamp base.
5. Remove the bulb from the lamp base.

INSTALLATION PROCEDURE
1. Install the bulb to the lamp base.
2. Install the dome lamp lens and trim bezel to the lamp base.
3. Connect the electrical connector.
4. Align the pins with the holes in the roof and push the lamp up in order to install the dome lamp to the roof.
5. Connect the negative battery cable.