Wake-Up State

The following wake-up signals will turn ON the BCM. The BCM can then begin active control and/or monitoring of certain devices:
^ The door ajar switches
^ The door handle switches (utility only)
^ The dome lamp
^ The park lamps
^ The power door lock switches
^ The gate ajar switch
^ The interior lamp request active
^ The ignition key put into the ignition switch
^ The ignition key removed from the ignition switch
^ The ignition in the RUN position
^ The key in the door lock switch (Envoy only)
^ The lift glass release switch
^ The lift glass jamb switch
^ The RFA request to the BCM
^ Any Class 2 communication that requires BCM interaction