Rear

REMOVAL PROCEDURE
1. Put the wiper arm assembly into the park position.
2. Remove the hose assembly elbow from the vehicle connector.
3. Remove the cap from the wiper arm assembly.
4. Remove the nut from the wiper arm assembly.
5. Remove the wiper arm assembly from the shaft.

INSTALLATION PROCEDURE

IMPORTANT:
^ Install the wiper arm assembly in the park position.
^ Rest the wiper arm assembly on the wiper arm park ramp.

1. Install the wiper arm assembly onto the wiper motor shaft.
2. Install the nut onto the wiper arm assembly.

Tighten
Tighten the nut to 23 N.m (17 lb ft).

3. Install the cap to the wiper arm assembly.
4. Install the hose assembly elbow to the vehicle connector.