Caliper Wear Shim Specifications

If bumper gap exceeds 0.145 inch, remove old caliper and replace with new caliper. If bumper gap with new caliper measures between 0.058 and 0.145 inch, select shim from table. If bumper gap with new caliper exceeds 0.145 inch, replace anchor plate.

More Than 0 in. Use new key and spring when assembling new components.	But Not Exceeding	0.058 Inch (in)
	Shim Thickness	None Required
More Than 0.058 in. Use new key and spring when assembling new components.	But Not Exceeding	0.101 Inch (in)
	Shim Thickness	0.025 Inch (in)