Clock

In order to set the clock, perform the following steps:
1. Push and hold the HR button until the correct hour appears on the display.
2. Press and hold the MN button until the correct minute appears on display.
There is an initial 2 second delay before the clock goes into the time-set mode.
3. Press RECALL or HR/MN in order to display the clock with the ignition OFF.
The time will be displayed for a few seconds.

In order to set the clock, Perform the following steps:
1. Press and hold the HR or MIN push button until the clock begins to change.
2. There will be an initial 2 second delay before the clock goes into the time-set mode.
3. Release the push button when the correct time is displayed.
4. The clock may be set with the vehicle turned OFF.